Newbie build - Mini GF

Smoker Clones are your own version of a commercially available Smoker. Examples are Stumps, Jambo, Backwoods, or any other you want to try to copy.
Post Reply
richy20
Just Got in trouble for buying tools
Just Got in trouble for buying tools
Posts: 39
Joined: June 15th, 2015, 7:45 pm

Re: Newbie build - Mini GF

Post by richy20 » May 23rd, 2017, 2:54 pm

I did on mine but did not put anything on the fire box and chute. I know that a lot of people on here don't do anything at all but I figured I would. I used ultra high heat rustolyeum paint. Obviously I did not put paint inside the interior cook chamber where food will be but just on the outside of the interior cook chamber skin.



clutch_kick
Smokerbuilder
Smokerbuilder
Posts: 60
Joined: September 13th, 2015, 1:40 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Malta
Contact:

Re: Newbie build - Mini GF

Post by clutch_kick » May 23rd, 2017, 2:55 pm

That's what I had in mind. Thanks

Sent from my IRON using Tapatalk



User avatar
Squiggle
Expert
Expert
Posts: 2611
Joined: December 19th, 2015, 5:04 pm
Title: Reformed non-smoker!
BBQ Comp Team Name: Not competing yet...
Location: Mole Creek, Tasmania

Re: Newbie build - Mini GF

Post by Squiggle » May 23rd, 2017, 5:03 pm

That's probably a good idea, I didn't on mine cause metal needs oxygen to corrode & with the sides sealed that should be an issue. :kewl:


Formerly known as "Hey you there in the bushes!"

Post Reply

Return to “Smoker Clones”