Finally pulled the trigger!

Smoker Clones are your own version of a commercially available Smoker. Examples are Stumps, Jambo, Backwoods, or any other you want to try to copy.
Post Reply
J0hn
beginner
beginner
Posts: 5
Joined: April 16th, 2016, 3:17 am

Re: Finally pulled the trigger!

Post by J0hn » September 23rd, 2016, 7:56 am

That certainly makes the shopping list a little easier! Thank you, I'm sure that will save me hours converting between tenths of inches and mm.



User avatar
Squiggle
Expert
Expert
Posts: 2611
Joined: December 19th, 2015, 5:04 pm
Title: Reformed non-smoker!
BBQ Comp Team Name: Not competing yet...
Location: Mole Creek, Tasmania

Re: Finally pulled the trigger!

Post by Squiggle » September 23rd, 2016, 7:03 pm

Another tip when building the mini in metric, I started with the FB assembly & built the frame to suit that & then mostly built the smoker from the stuff I'd already built, this was you know the measurements are right cause sometimes the conversions overlap when you have to use bigger frame tube & then try to convert the sizes for the panels. i.e. 1 1/2in tube from the plan equals 38mm & you'll be using 40mm, the panels will be too big if you convert directly from the plans. Just use the plans as a guide for the shape & idea, then measure everything yourself. :kewl:


Formerly known as "Hey you there in the bushes!"

Post Reply

Return to “Smoker Clones”