Spacers for Charcoal Chute on Stumps Clone

Smoker Clones are your own version of a commercially available Smoker. Examples are Stumps, Jambo, Backwoods, or any other you want to try to copy.
Post Reply
Dantes Inferno
Wants to build a smoker
Wants to build a smoker
Posts: 21
Joined: June 9th, 2015, 1:20 pm

Spacers for Charcoal Chute on Stumps Clone

Post by Dantes Inferno » July 1st, 2015, 7:55 pm

Second day into the build and Im up to putting the curbs on for the doors, it calls for 1/2" spacer and a 3/4" spacer, what I dont understand is where they go? Also Starting the charcoal chute tomorrow and where the charcoal sits where it says the rebar is, those directtions are very confusing?? Not sure what the spacing is or what hold the rebar, I understand the plans all the way through except for these two items, PLEASE HELP!



User avatar
Big T
Moderator
Moderator
Posts: 5628
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: Spacers for Charcoal Chute on Stumps Clone

Post by Big T » July 1st, 2015, 8:04 pm

I'm sure Puff or one of the guys who have built one will be along to answer your question or you could give Frank a call.


Measure Twice.....Cut Three Times.

User avatar
Frank_Cox
Site Admin
Site Admin
Posts: 7017
Joined: January 17th, 2011, 6:30 pm
Title: OB1
BBQ Comp Team Name: Team SmokerBuilder- Competition BBQ Team
KCBS Cert. BBQ Judge
Location: Missouri
Contact:

Re: Spacers for Charcoal Chute on Stumps Clone

Post by Frank_Cox » July 1st, 2015, 9:13 pm

Is hard to reach me by phone right now but you can text me at the number on the plans or email me.


Click here : How to Upload Pics (Video) | Click here : Are you on FaceBook? |
--->Click here : Need plans for your build? OR Message me at ---->>> https://m.me/SmokerPlans
--->Are you interested in building smokers for profit?
Click here : Shoot me a PM to learn about a new opportunity launching soon!

User avatar
Frank_Cox
Site Admin
Site Admin
Posts: 7017
Joined: January 17th, 2011, 6:30 pm
Title: OB1
BBQ Comp Team Name: Team SmokerBuilder- Competition BBQ Team
KCBS Cert. BBQ Judge
Location: Missouri
Contact:

Re: Spacers for Charcoal Chute on Stumps Clone

Post by Frank_Cox » July 1st, 2015, 9:21 pm

Here's a link to Smokin D Towns thread. .....
viewtopic.php?p=66278#p66278


Click here : How to Upload Pics (Video) | Click here : Are you on FaceBook? |
--->Click here : Need plans for your build? OR Message me at ---->>> https://m.me/SmokerPlans
--->Are you interested in building smokers for profit?
Click here : Shoot me a PM to learn about a new opportunity launching soon!

User avatar
SmokinDTown
Needs a Bigger Shop!
Needs a Bigger Shop!
Posts: 89
Joined: January 18th, 2015, 7:04 pm

Re: Spacers for Charcoal Chute on Stumps Clone

Post by SmokinDTown » July 2nd, 2015, 8:35 am

Dante,
Are you talking about the flanges for the FBA? These would be shown on the FBA page in Frank's drawings. The doors on the original Stumps clone are flush with the outer surface of the smoker. The flanges are what the doors on the FBA seal against. But they are 1/4" thick on the top, and 1/2" thick on the bottom. Hope this helps.



Post Reply

Return to “Smoker Clones”