Smoker Terminology

Tips and tricks for everything related to finishing your smoker.
User avatar
Pete Mazz
Administrator
Administrator
Posts: 3031
Joined: February 16th, 2013, 8:19 am
Title: Meathead
Location: Bucks County, PA

Re: Smoker Terminology

Post by Pete Mazz » September 10th, 2019, 3:44 pm

MrsSmokerBuilder wrote:
September 10th, 2019, 2:55 pm
Thanks for the info Pete! I'm trying to learn this stuff too!
:x


If it's tourist season, how come I can't shoot 'em?

Don't speak the language? Try this: Smoker Terminology

Try my SmokerBuilder Calculators

tmunns
Newbie
Newbie
Posts: 3
Joined: May 27th, 2015, 9:57 pm
Title: Member
BBQ Comp Team Name: Not competing yet...

Re: Smoker Terminology

Post by tmunns » September 11th, 2019, 7:55 pm

Thanks for the explanation, makes since now.



User avatar
Big T
Moderator
Moderator
Posts: 5909
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: Smoker Terminology

Post by Big T » May 4th, 2020, 8:39 pm

0F1FE763-D762-4ABC-B935-D5021D5281D5.jpeg
. The red line is the baffle plate, the blue line is the shadow plate and the yellow line is the throat. Normally there’s about a 1” air gap between the top of the shadow plate and the bottom of the baffle plate. The shadow plate runs about 20%-25% of the length of the baffle plate and it is also 1/4” plate.
You do not have the required permissions to view the files attached to this post.


Measure Twice.....Cut Three Times.

Post Reply

Return to “Fabrication How to's”