Help with throat dimensions

All the calculators you'll need to design your own smoker.
bswisher
beginner
beginner
Posts: 11
Joined: December 1st, 2017, 12:01 pm

Help with throat dimensions

Postby bswisher » December 6th, 2017, 10:05 pm

I have used the calculator and think I have everything sorted out but I need help with the actual half moon size. My tank is 60 gal, 20x48, fb is square 17x17x17, throat size comes out to 39.3. I need to know the width and height of the opening. I want to place the bottom of the throat even with the bottom curve of the tank.

Thanks in advance



User avatar
Big T
Expert
Expert
Posts: 3859
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: Help with throat dimensions

Postby Big T » December 6th, 2017, 11:11 pm

Welcome aboard!! Check out Pete's throat calculator http://planetcalc.com/5155/ It'll show your required cuts.


Measure Twice.....Cut Three Times.

bswisher
beginner
beginner
Posts: 11
Joined: December 1st, 2017, 12:01 pm

Re: Help with throat dimensions

Postby bswisher » December 8th, 2017, 9:30 am

Thank you, the calculator gave me the info I was looking for. Appreciated



User avatar
Big T
Expert
Expert
Posts: 3859
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: Help with throat dimensions

Postby Big T » December 8th, 2017, 1:35 pm

You're welcome :beer:


Measure Twice.....Cut Three Times.

bswisher
beginner
beginner
Posts: 11
Joined: December 1st, 2017, 12:01 pm

Re: Help with throat dimensions

Postby bswisher » December 8th, 2017, 3:20 pm

One more quick question... I have seen several posts online stating that i should take the recommended size (39.3) SQ IN and multiply it by 1.5 which would change my opening from 15.5x3.68 to somewhere around 16.75x4.75. Which is correct?



User avatar
Big T
Expert
Expert
Posts: 3859
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: Help with throat dimensions

Postby Big T » December 8th, 2017, 5:19 pm

I always go with the size that the calculator recommends and I've never had any issues. I do normally round it up to the next square inch because of my OCD but that isn't really necessary...lol. Feel free to ask any questions that you have and someone will be glad to help you out.


Measure Twice.....Cut Three Times.

bswisher
beginner
beginner
Posts: 11
Joined: December 1st, 2017, 12:01 pm

Re: Help with throat dimensions

Postby bswisher » December 8th, 2017, 5:55 pm

Thank you sir, that's good enough for me.




Return to “SmokerBuilder Calculators”

Who is online

Users browsing this forum: No registered users and 1 guest