60x24 RF Build

Discussion about Reverse Flow Smokers
Post Reply
User avatar
SOILhunter
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 216
Joined: September 14th, 2012, 9:23 pm
Title: Member
Location: Carmi, IL

60x24 RF Build

Post by SOILhunter » April 14th, 2018, 5:51 pm

Hey guys, long time no post for me but starting a new build, I figured I better share some pics! Since “Mack” is such a big hit I figured I better go for the same design, just a little bigger. 60x24x24 cook chamber with a 36x24x24 WC. I cut everything I could last night on the plasma table and threw it together this morning, 4 hours into the build so far minus the cutting.
You do not have the required permissions to view the files attached to this post.



User avatar
Rodcrafter
Moderator
Moderator
Posts: 8456
Joined: July 21st, 2012, 5:46 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Orlando, Florida

Re: 60x24 RF Build

Post by Rodcrafter » April 14th, 2018, 5:53 pm

Wow, you’re getting it done!


Sent from my iPhone using Tapatalk


Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........

MattJ
Needs a Bigger Shop!
Needs a Bigger Shop!
Posts: 89
Joined: May 10th, 2016, 10:15 am
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Mississippi

Re: 60x24 RF Build

Post by MattJ » April 14th, 2018, 5:56 pm

Nice



User avatar
Big T
Moderator
Moderator
Posts: 5626
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: 60x24 RF Build

Post by Big T » April 14th, 2018, 6:30 pm

That's going to be a fine smoker!


Measure Twice.....Cut Three Times.

User avatar
Dirtytires
Expert
Expert
Posts: 2278
Joined: November 24th, 2015, 12:36 am
Title: It ain't broke...yet
BBQ Comp Team Name: Dont compete...cook for events once in a while
Location: Phoenix, Az

Re: 60x24 RF Build

Post by Dirtytires » April 14th, 2018, 8:53 pm

Great progress



bstory
Expert
Expert
Posts: 353
Joined: July 15th, 2013, 8:45 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Amarillo Texas

Re: 60x24 RF Build

Post by bstory » April 14th, 2018, 10:04 pm

Oh man, nice work.


Sent from my iPhone using Tapatalk Pro



User avatar
ajfoxy
Expert
Expert
Posts: 2237
Joined: April 12th, 2016, 8:07 pm
Title: Neophyte Smoker Bldr
BBQ Comp Team Name: Not competing yet...
Location: Brisbane, Queensland, Australia

Re: 60x24 RF Build

Post by ajfoxy » April 14th, 2018, 11:25 pm

Very nice.


Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.

Whether you think that you can, or that you can't, you are usually right. Henry Ford

User avatar
Rodcrafter
Moderator
Moderator
Posts: 8456
Joined: July 21st, 2012, 5:46 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Orlando, Florida

Re: 60x24 RF Build

Post by Rodcrafter » April 15th, 2018, 7:56 am

Makes me want to build one or 2. Lol


Sent from my iPhone using Tapatalk


Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........

User avatar
SOILhunter
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 216
Joined: September 14th, 2012, 9:23 pm
Title: Member
Location: Carmi, IL

Re: 60x24 RF Build

Post by SOILhunter » April 20th, 2018, 5:16 pm

Got to spend a couple more hours on the build this evening. Insulation and inner walls of the firebox are in as well as all of the angle for the doors. Overall I think it’s comong along pretty well, one of the easiest cookers I have built.
You do not have the required permissions to view the files attached to this post.



User avatar
Big T
Moderator
Moderator
Posts: 5626
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: 60x24 RF Build

Post by Big T » April 20th, 2018, 6:02 pm

:LG:


Measure Twice.....Cut Three Times.

bstory
Expert
Expert
Posts: 353
Joined: July 15th, 2013, 8:45 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Amarillo Texas

Re: 60x24 RF Build

Post by bstory » April 21st, 2018, 1:38 pm

That sucker is coming together.


Sent from my iPhone using Tapatalk Pro



User avatar
Rodcrafter
Moderator
Moderator
Posts: 8456
Joined: July 21st, 2012, 5:46 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Orlando, Florida

Re: 60x24 RF Build

Post by Rodcrafter » April 23rd, 2018, 1:35 pm

:LG:


Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........

MattJ
Needs a Bigger Shop!
Needs a Bigger Shop!
Posts: 89
Joined: May 10th, 2016, 10:15 am
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Mississippi

Re: 60x24 RF Build

Post by MattJ » April 24th, 2018, 9:10 pm

What is a ball part figure on the steel for this build? I am getting a quote on material for a Mack build. I know steel prices may have increased since you got your material but just wondering for comparison.



User avatar
SOILhunter
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 216
Joined: September 14th, 2012, 9:23 pm
Title: Member
Location: Carmi, IL

Re: 60x24 RF Build

Post by SOILhunter » April 28th, 2018, 9:04 am

Mine is a little bigger than Mack but mainly just increases the length a little. Ive used up almost every bit of 2 5x10s and part of a 4x8, I should be able to get the doors from the rest of the 4x8, I hope. The 4x8 I already had on hand but the 2 5x10s were $764 total.

Thanks guys, haven’t had much time for the build lately with turkey season going on here but should be able to get back to it soon!



User avatar
SOILhunter
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 216
Joined: September 14th, 2012, 9:23 pm
Title: Member
Location: Carmi, IL

Re: 60x24 RF Build

Post by SOILhunter » May 19th, 2018, 8:31 pm

Was able to work on the build for a few hours today. I was able to get the trailer up enough to be able to move this little guy around...not leaving at that height I just ran out of time again! Also got all of the racks cut so I can throw them together after work one day.

I can’t add the last pic for some reason, keep getting an error, sorry guys
You do not have the required permissions to view the files attached to this post.



User avatar
Big T
Moderator
Moderator
Posts: 5626
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: 60x24 RF Build

Post by Big T » May 19th, 2018, 9:32 pm

:kewl:


Measure Twice.....Cut Three Times.

User avatar
ajfoxy
Expert
Expert
Posts: 2237
Joined: April 12th, 2016, 8:07 pm
Title: Neophyte Smoker Bldr
BBQ Comp Team Name: Not competing yet...
Location: Brisbane, Queensland, Australia

Re: 60x24 RF Build

Post by ajfoxy » May 20th, 2018, 3:02 am

Looking good.


Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.

Whether you think that you can, or that you can't, you are usually right. Henry Ford

User avatar
Rodcrafter
Moderator
Moderator
Posts: 8456
Joined: July 21st, 2012, 5:46 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Orlando, Florida

Re: 60x24 RF Build

Post by Rodcrafter » May 20th, 2018, 2:25 pm

Oh yeah


Sent from my iPhone using Tapatalk


Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........

User avatar
SOILhunter
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 216
Joined: September 14th, 2012, 9:23 pm
Title: Member
Location: Carmi, IL

Re: 60x24 RF Build

Post by SOILhunter » June 22nd, 2018, 2:52 pm

Getting a little work done today...trying to get the doors finished up!
You do not have the required permissions to view the files attached to this post.



User avatar
SOILhunter
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 216
Joined: September 14th, 2012, 9:23 pm
Title: Member
Location: Carmi, IL

Re: 60x24 RF Build

Post by SOILhunter » June 22nd, 2018, 3:41 pm

Copper dampers just because...I’ll bend the tabs down after they are finished.
You do not have the required permissions to view the files attached to this post.



User avatar
SOILhunter
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 216
Joined: September 14th, 2012, 9:23 pm
Title: Member
Location: Carmi, IL

Re: 60x24 RF Build

Post by SOILhunter » June 22nd, 2018, 4:30 pm

One more down...I’ll save the CC doors for another day.
You do not have the required permissions to view the files attached to this post.



User avatar
Big T
Moderator
Moderator
Posts: 5626
Joined: September 1st, 2013, 2:40 pm
Title: Go Getter
BBQ Comp Team Name: Backyard Boys
Location: Lower Alabama

Re: 60x24 RF Build

Post by Big T » June 22nd, 2018, 4:34 pm

Cool looking pin wheels :kewl:


Measure Twice.....Cut Three Times.

User avatar
ajfoxy
Expert
Expert
Posts: 2237
Joined: April 12th, 2016, 8:07 pm
Title: Neophyte Smoker Bldr
BBQ Comp Team Name: Not competing yet...
Location: Brisbane, Queensland, Australia

Re: 60x24 RF Build

Post by ajfoxy » June 22nd, 2018, 4:53 pm

:yth: very flash indeed.


Learning generally boils down to "Repetition or the avoidance of pain", some people learn by doing, some by watching and some just have to pee on the electric fence.

Whether you think that you can, or that you can't, you are usually right. Henry Ford

User avatar
Rodcrafter
Moderator
Moderator
Posts: 8456
Joined: July 21st, 2012, 5:46 pm
Title: Member
BBQ Comp Team Name: Not competing yet...
Location: Orlando, Florida

Re: 60x24 RF Build

Post by Rodcrafter » June 27th, 2018, 9:42 am

:LG:


Current Smokers: Backyard RF Offset and Hybrid RF Offset trailer rig with Cowboy cooker and fish fryer, always room for more........

User avatar
SOILhunter
Big Time SmokerBuilder
Big Time SmokerBuilder
Posts: 216
Joined: September 14th, 2012, 9:23 pm
Title: Member
Location: Carmi, IL

Re: 60x24 RF Build

Post by SOILhunter » June 27th, 2018, 7:17 pm

CC Doors are built and hung so now it’s down to the little stuff
You do not have the required permissions to view the files attached to this post.



Post Reply

Return to “Reverse Flow Smokers”